8.1. Insertion Tools and Blanking Plugs


8.1. Insertion Tools and Blanking Plugs

Benoil makes a range of fitting tools to enable discs to be securely fitted or removed, ie without risk of the tool being able to touch and damage the disc. While many are standard, we are always willing to make adaptations to suit particular purposes. Those marked as extended, in particular, are made with a stem length as required. Cross-cuts are 4 way unless otherwise stated.

T-bar handles are useful for general purpose fitting and de-mounting. Where a particular torque must be applied, it is necessary to use a stub form to engage a torque tool.


109101	T-bar Handle	for 8 & 11mm	to fit 8.5. & 8.6.
109102	Withdrawn, use 109104
109103	Withdrawn, use 109106
109104	Stub hex toughened steel	for 5mm	to fit 8.4.
109105	T-bar Handle	for 1.50"	to fit 8.10.

109106	Stub square 1/2"	for 1.50"	to fit 8.10.
109107	Stub hex end, in SS431	for 8 & 11mm	to fit 8.5. & 8.6.
109108	Stub square 3/4" extended	for 2.00"	to fit 8.11.
109109	Stub square 1/2"	for 1.00"	to fit 8.8.
109110	Stub square 1/2"	for 3.00"	to fit 8.13.

109111	Stub square 1/2"	for 2.50"	to fit 8.12.
109112	T-bar handle	for 1.00"	to fit 8.8.
109113	Stub square 3/4"	for 2.00"	to fit 8.11.
109114	Stub square 1/2" extended	for 2.50"	to fit 8.12.
109115	T-bar Handle extended	for 1.50"	to fit 8.10.

109116	Stub square 1/2"	for 1.125"	to fit special
109117	T-bar handle	for 0.75"/19mm	to fit 8.7.
109118	Stub square 1/2" extended	for 3.00"	to fit 8.13.
109119	Stub as 109109 but 8-way	for 1.00"	to fit 8.8.
109120	T-bar as 109112 but 8-way	for 1.00"	to fit 8.8.

109121	T-bar handle extended	for 2.00"	to fit 8.11.
109122	T-bar handle extended	for	to fit
109123	T-bar handle extended	for 2.50"	to fit 8.12.

Benoil also makes a range of blanking plugs for tool testing purposes in SS316.

	109201		5mm cross-cut blank
	109202		8mm blank
	109203		11mm blank
	109204		1.00"/25mm blank
	109205		1.50"/38mm blank

	109206		5mm Hex-drive blank